MIL-L-80061B
u. First article inspection, if different (see 4.2).
v. Quality fonformance inspection, if different (see 4.3).
w. specific packaging, packing and special marking, if required (see 5.1).
(Specify level A packaging, specify level A or B packing and
specify special marking, if required.)
6.2.2 Contract data requirements. Required technical data, such as
operators' manuals, parts lists, foundation and anchor bolt plans, wiring
-
diagrams and other inspections for operation and maintenance as identified
on a numbered DD Form 1664, should be specified on a DD Form 1423 incorpo-
rated into the contract.
6.3 First article. When a first article is required, it shall be tested
and approved under the appropriate provisions of 7-104.55 of the Defense
Inquisition Regulation. The first article should be a preproduction sample
or a standard production item from the contractor's current inventory. The
contracting officer should include specific instructions in all procurement
instrument regarding arrangements f& examinations test and approval of the
first article.
6.4 Safety and health requirements. Paragraph 3.2.4 requires compliance
only with those OSHA requirements that concern the machine itself. It does
not require compliance with those OSHA requirements that concern "the machine
in its operating environment" such as noise levels, radiation levels, electro-
magnetic emissions, noxious vapors, air contaminants, heat, etc. Since OSHA
limits the total hazard level of those hazards in the environment (and does
not limit the hazard level of individual machine in the environment), the
requesting activity is advised to analyze the existing hazard levels in the
proposed operating environment and specify additional machine requirements
that will integrate the new machine into its future operating environment.
If specific point-of-operation guarding is required, the requesting activity
should specify the exact configuration of the guard required, as in most
cases, the guard configuration is dependent on the size and configuration of
the workpieces that will be machined. The above and other additional safety
and health requirements should be specified in detail under 6.2.1(g).
6.5 Changes from previous issue. Asterisks are not used in this revision
to identify changes, with respect to the previous. issue, due to the extensive-
ness of the changes.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business