MIL-L-23249D
3.2.4 Controls. All operating controls shall be located convenient to
the operator at his normal work station.
3.2.5 Safety and health requirements. Covers, guards, or other safety
devices shall be provided for all parts of the machine that present safety
hazards. The safety devices shall-not interfere with the operation of the
machine. The safety devices shall prevent unintentional contact with the
guarded part, and shall be removable to facilitate inspection, maintenance
and repair of the parts. All machine parts, components, mechanisms, and
assemblies furnished on the machine, whether or not specifically required
herein, shall comply with all of the requirements of OSHA 2206 that are
applicable to the machine itself. Additional safety and health requirements
shall be as specified (see 6.2.1).
3.2.6 Mercury restriction. The machine shall not contain mercury or
mercury compounds nor be exposed to free mercury during manufacture.
3.2.7 Asbestos restriction. Asbestos and materials containing asbestos
shall not be used on or in the machine.
3.2.8 Environmental protection. The machine shall be designed and
constructed such that, under the operating, service, transportation and
storage conditions described herein, the machine shall not emit materials
hazardous to the ecological system as prescribed by federal, state or local
statutes in effect at the point of the installation.
3.2.9 Lubrication. Means shall be provided to insure adequate
lubrication for all moving parts. Recirculating Lubrication'systems shall
include a filter which is cleanable or replaceable. Each lubricant
l reservoir shall have means for determining fluid level. All oil holes,
grease fittings and filler caps shall be accessible.
3.2.10 Interchangeability. To provide for replacement of worn or damaged
parts, all parts shall be manufactured to definite dimensions and tolerances
that will permit installation of replacement parts without modification to
the part or the machine.
3.3 Construction. The machine shall be constructed of parts which are
new, without defects and free of repairs. The structure shall be capable of
withstanding all forces encountered during operation of the machine to its
maximum rating and capacity without permanent distortion.
3.3.1 Castings and forgings. All castings and forgings shall be free
from defects such as scale and mismatching. Processes such as welding,
peening, plugging, or filling with solders or pastes shall not be used on
castings or forgings to reclaim any defective components for use on the
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business