MIL-L-23249D
3.12.1 Lubrication chart or plate. Unless otherwise specified (see
6.2.1), a lubrication chart or plate shall be permanently and securely
attached to each machine. If a chart is furnished, it shall be placed in a
transparent plastic folder, or permanently sealed between clear plastic
sheets with suitable means of mounting. The chart or plate shall contain
the following information:
Points of lubricant application
Servicing interval
Type of lubricant
Viscosity
3.12.2 Nameplate. Unless otherwise specified (see 6.2.1), a corrosion-
resistant metal nameplate shall be securely attached to each machine. The
nameplate shall contain the information listed below. If the machine is a
special model, the model designation shall include the model of the basic
standard lathe and a suffix identified in the manufacturer's permanent
records. The captions listed may be shortened or abbreviated, provided the
entry for each caption is clear as to its identity.
Nomenclature
Manufacturer's name
Manufacturer's model designation
Manufacturer's serial number
Horsepower
Type
Size
Power input (volts, total amps, phase, frequency)
Contract Number or Order Number
National Stock Number or Plant Equipment Code
Date of manufacture
3.13 Technical data. When technical data is required it shall be
furnished in accordance with the requirements of the contract.
3.14 Workmanship
Workmanship of the lathe and accessories shall be of a
quality equal to that of the manufacturer's commercial equipment of the type
specified herein.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the
performance of all inspection requirements specified herein. Except as
otherwise specified in the contract or purchase order, the contractor may
use his own or any other facilities suitable for the performance of the
inspection requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any inspections
set forth in the specification where such inspections are deemed necessary
to assure supplies and services conform to prescribed requirements.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business